Garmin 695 Manual Do Utilizador

190-00919-00 Rev. G

41

The course deviation scale setting is adjustable for Auto, ±0.25, 1.25 or 5.0 (nautical 

mile, statute mile, or kilometer) full-scale deflection.  The course deviation scale appears 
on the lower right corner of the HSI.  The default setting is Auto, which uses three 
factors to determine the distance from the center of the CDI to full left or right limits: 

• CDI scale = 1.25 - within 30 nm of any airport in the active route.
• CDI scale = 0.25 - on an approach leg or within 2 nm of the FAF or MAP.
• CDI scale = 5.0 - if the previous two conditions do not exist.

 From the Map Page press the PANEL Softkey.
Or:
1)   From the Map Page press the MENU Key to display the Map Page Menu.
2)  Turn or move the FMS Joystick to highlight ‘Select Page Layout’ and press 

the ENT Key.

3)  Turn or move the FMS Joystick to highlight ‘Map with Panel’ and press the 

ENT Key.

The CDI scale can be set from the Map Page Menu.

1)  From the Map Page with the Panel, HSI, or Compass Arc displayed, press 

the MENU Key to display the Map Page Menu 

2)  Turn or move the FMS Joystick to highlight ‘Set CDI Scale’, and press the 

ENT Key.  The ‘Set CDI Scale’ Menu appears.

3)  Turn or move the FMS Joystick to highlight the desired menu option, and 

press the ENT Key.