Motorola GP366R Manual Do Utilizador

If a channel continually generates unwanted calls/
noise (a “nuisance” channel), you can temporarily 
remove it from the scan list by performing a 
Nuisance Channel Delete operation:

1. While the radio is on the Nuisance 

Channel, press and hold the Nuisance 
Delete button until you hear the scan start 
alert tone.

2. Release the Nuisance Delete button.

Note:   You cannot perform a Nuisance Channel 

Delete on a priority channel or if there is only 
one remaining channel in the scan list.

1. Press the Scan button to stop scanning. 

The scan stop alert tone will sound.

2. Press the Scan button again to re-start 

scanning. The scan start alert tone will 
sound, and the scan list will contain all 
programmed channels.

1. Follow the instructions for selecting Scan 

On/Off via the menu

2. Select Scan Off. Your radio will stop 

scanning, the scan stop alert tone  will 
sound, the display icon G and the LED 
indicator will be extinguished.

3. Select Scan On. Your radio will re-start 

scanning, the scan start alert tone  will 
sound, the display icon G will be lit , the 
LED indicator will blink green and the scan 
list will contain all programmed channels.

You can call forward calls to your radio to another 
radio if you are unable to take calls or are away 
from your radio.

You can switch On or Off Call Forward by using 
a preprogrammed Call Forward button or via the 
menu.