Lowrance electronic HDS SERIES Manual Do Utilizador
11
Panel Mount
1:
Attach the flush mounting template
to the selected mounting position
using adhesive tape.
2:
Drill pilot holes for the four hole saw
cuts and for the four self tapping
screws used to secure the display.
3:
Use a hole saw to cut the four corner
radius
4:
Cut along the dotted line and remove
the shaded area.
5:
Connect all cables to the rear of
the unit before placing the unit
into the console. Secure using the four
provided #6-20 x 1-1/2” screws
6:
To finish off the installation firmly
clip the front bezel in place