Sony 3-300-703-11(2) Manual Do Utilizador

C D-LIGHT SYNC OUT jack

Connect the D-LIGHT SYNC controller. 
You need to connect the D-LIGHT SYNC 
controller to a lighting device* (not 
supplied). The lighting device will react 
according to the control signals 
transmitted by the D-LIGHT SYNC 
controller upon receiving music source 
from the system. For details on the use of 
the D-LIGHT SYNC controller and 
lighting device, refer to the operating 
instructions supplied with the respective 
device.

* Refer to the operating instructions supplied 

with the D-LIGHT SYNC controller for the 
recommended lighting device.

The lighting effect may be different depending 
on the connected lighting device or the type of 
music being played back.

D SYSTEM CONTROL jack

Connect the system connector of 
subwoofer to the SYSTEM CONTROL 
jack on the unit.
Insert the plug of the SYSTEM 
CONTROL cord into the jack, then secure 
the screws of the plug.

E FRONT SPEAKER terminals

Connect the front speaker left/right to the 
terminals on the subwoofer.
Insert only the stripped portion of the 
speaker cords into the FRONT SPEAKER 
terminals.

Be sure to use only the supplied speakers.

F VOLTAGE SELECTOR

For models equipped with a voltage 
selector on the subwoofer, set VOLTAGE 
SELECTOR to the position of your local 
power line voltage.
Depending on the model, the VOLTAGE 
SELECTOR may differ.

G Power

Connect the power cord on the subwoofer 
to a wall outlet after you have make all 
connections. The demonstration appears 
in the display. When you press "/1, the 
system turns on and the demonstration 
automatically ends.
If the supplied adaptor on the plug does 
not fit your wall outlet, detach it from the 
plug (only for models equipped with an 
adaptor).

D-LIGHT SYNC 
controller cord

Unit (Left panel)

Subwoofer (Rear panel)

Screws

Plug

SYSTEM CONTROL cord

VOLTAGE SELECTOR

230-

240V

120V

220V