Sony 3-300-703-11(2) Manual Do Utilizador
41
GB
Ad
ditional Inf
ditional Inf
o
rmation
There is no sound.
• Turn VOLUME +/– clockwise (or press
VOLUME + repeatedly on the remote).
• Check the CROSS FADER slider
• Check the speaker connections
• There is no audio output during
Recording Timer.
There is no microphone sound.
• Turn VOLUME +/– clockwise (or press
VOLUME + repeatedly on the remote)
or turn MIC LEVEL clockwise to adjust
the microphone volume.
or turn MIC LEVEL clockwise to adjust
the microphone volume.
• Make sure the microphone is connected
to the MIC jack correctly.
There is severe hum or noise.
• A TV or VCR is placed too close to the
unit. Move the unit away from the TV or
VCR.
VCR.
• Move the unit away from the source of
noise.
• Connect the unit to a different wall
outlet.
• Install a noise filter (commercially
available) to the power cord.
• Turn off surrounding electrical
equipment.
The timer does not function.
• Check the timer setting and set the
correct time (page 38).
• Cancel the Sleep Timer function
• You cannot select the Play Timer and
the Recording Timer at the same time.
• Check the CROSS FADER slider
The remote does not function.
• Remove the obstacles between the
remote and the unit.
• Move the remote closer to the unit.
• Point the remote at the unit’s sensor.
• Replace the batteries (R6/size AA).
• Move the unit away from the
• Point the remote at the unit’s sensor.
• Replace the batteries (R6/size AA).
• Move the unit away from the
fluorescent light.
There is no sound output from the
headphone.
headphone.
• Turn i LEVEL clockwise to adjust the
headphone volume.
• Check the headphone connection.
• Check that the audio source on the
• Check that the audio source on the
selected channel is played back.
There is beat sound even though you
have not played back any source.
have not played back any source.
• Press BEAT ON/OFF to turn off beat
pattern.
There is acoustic feedback.
• Reduce the volume.
• Move the microphone away from the
• Move the microphone away from the
speakers or change the direction of the
microphone.
microphone.
Speakers
Sound comes from one channel or
unbalanced left and right volume.
unbalanced left and right volume.
• Place the speakers as symmetrically as
possible.
• Check that the speaker are connected
securely and correctly.
• The source being played back is
monaural.
There is no sound from the
subwoofer.
subwoofer.
• Adjust the subwoofer level to the
appropriate level.
• Check that the subwoofer is connected
securely and correctly.
• Check that the SYSTEM CONTROL
jack on the unit is connected.
• Check that the power cord on the
subwoofer is connected and the power is
turned on.
turned on.
Sound lacks bass.
• Check that the speaker’s + and –
terminals are connected correctly.
Continued
l