Sony 3-300-703-11(2) Manual Do Utilizador
45
GB
Ad
ditional Inf
ditional Inf
o
rmation
Playback does not start.
• Turn off the system, then connect the
USB device again.
• Connect the supported USB device
• Press HS (or N on the remote) to
start playback.
Playback does not start from the first
track.
track.
• Set the play mode to Normal Play
The audio files cannot be played
back.
back.
• MP3 files in MP3 PRO format cannot be
played back.
• Some AAC files may not be played back
correctly.
• WMA files in Windows Media Audio
Lossless and Professional format cannot
be played back.
be played back.
• The data is not stored in MP3/WMA/
AAC format.
• USB device formatted with file systems
other than FAT16, or FAT32 (cluster
size 512 byte – 32 kbyte) are
unsupported.*
size 512 byte – 32 kbyte) are
unsupported.*
• If you use partitioned USB device, only
audio files on the first partition can be
played back.
played back.
• Playback is possible up to 8 folder
levels.
• The number of folders has exceeded
997.
• The number of audio files has exceeded
999.
• Files that are encrypted or protected by
passwords, etc. cannot be played back.
* This system supports FAT16 and FAT32, but
some USB device may not support all of these
FAT. For details, see the operating
instructions of each USB device or contact the
manufacturer.
FAT. For details, see the operating
instructions of each USB device or contact the
manufacturer.
iPod
There is no sound.
• Make sure the iPod is connected
securely.
• Make sure the iPod is playing music.
• Adjust the volume.
• Depending on the contents of the iPod,
• Adjust the volume.
• Depending on the contents of the iPod,
it may take time to start playback.
• You are using an unsupported iPod. See
“Compatible devices with this system”
(page 52) for the supported device
types.
(page 52) for the supported device
types.
• Check the CROSS FADER slider
The sound is distorted.
• Reduce the volume.
• Set the “EQ” setting of the iPod to “Off”
• Set the “EQ” setting of the iPod to “Off”
or “Flat”.
The iPod cannot be charged.
• Make sure the iPod is connected
securely.
Tuner
There is severe hum or noise.
(“TUNED” or “STEREO” flashes in the
display)
(“TUNED” or “STEREO” flashes in the
display)
• Set the proper band and frequency
• Connect the antenna properly (page 13).
• Find a place and an orientation that
• Find a place and an orientation that
provide good reception, then set up the
antenna again. If you cannot obtain
good reception, we recommend that you
connect a commercially available
external antenna.
antenna again. If you cannot obtain
good reception, we recommend that you
connect a commercially available
external antenna.
• The supplied FM lead antenna receives
signals along its entire length, so make
sure you extend it fully.
sure you extend it fully.
• Locate the antennas as far away from
the speaker cords as possible.
• Try turning off the surrounding
electrical equipment.
Continued
l