Yamaha LIT-11626-16-27 Manual Do Utilizador
3 - 19
INSP
ADJ
ELECTRICAL/SPARK PLUG INSPECTION
EC370000
ELECTRICAL
EC371001
SPARK PLUG INSPECTION
1. Remove:
●
Spark plug
2. Inspect:
●
Electrode 1
Wear/damage
Wear/damage
→ Replace.
●
Insulator color 2
Normal condition is a medium to light
tan color.
Distinctly different color
Normal condition is a medium to light
tan color.
Distinctly different color
→ Check the
engine condition.
NOTE:
When the engine runs for many hours at low
speeds, the spark plug insulator will become
sooty, even if the engine and carburetor are in
good operating condition.
speeds, the spark plug insulator will become
sooty, even if the engine and carburetor are in
good operating condition.
3. Measure:
●
Plug gap
a
Use a wire gauge or thickness gauge.
Out of specification
Out of specification
→ Regap.
4. Clean the plug with a spark plug cleaner
if necessary.
Spark plug gap:
0.6 ~ 0.7 mm (0.02 ~ 0.03 in)
Standard spark plug:
CR6HSA (NGK)
U20FSR-U (DENSO)
U20FSR-U (DENSO)
5. Tighten:
●
Spark plug
NOTE:
●
Before installing a spark plug, clean the gas-
ket surface and plug surface.
ket surface and plug surface.
●
Finger-tighten
a the spark plug before
torquing to specification
b.
T
R
.
.
13 Nm (1.3 m · kg, 9.4 ft · lb)