D-Link DWC-1000 Manual Do Utilizador
Wireless Controller
User Manual
146
Figure 99 : Li st of Available Applica tions f or SSL P ort Forw arding
7.4 SSL VPN Client Configuration
Setup > VPN Settings > SSL VPN Client > SSL VPN Client
An SSL VPN tunnel client provides a point -to-point connection between the browser -
side machine and this controller. When a SSL VPN client is launched from the user
portal, a "network adapter" with an IP address from the corporate subnet, DNS and
WINS settings is automatically created. This allows local applicat ions to access
services on the private network without any special network configuration on the
remote SSL VPN client machine.
side machine and this controller. When a SSL VPN client is launched from the user
portal, a "network adapter" with an IP address from the corporate subnet, DNS and
WINS settings is automatically created. This allows local applicat ions to access
services on the private network without any special network configuration on the
remote SSL VPN client machine.
It is important to ensure that the virtual (PPP) interface address of the VPN tunnel
client does not conflict with physical devic es on the LAN. The IP address range for
the SSL VPN virtual network adapter should be either in a different subnet or non -
overlapping range as the corporate LAN.
client does not conflict with physical devic es on the LAN. The IP address range for
the SSL VPN virtual network adapter should be either in a different subnet or non -
overlapping range as the corporate LAN.
The IP addresses of the client‘s network interfaces (Ethernet, Wireless, etc.) cannot
be identical to the controller‘s IP address or a server on the corporate LAN that is
being accessed through the SSL VPN tunnel.
be identical to the controller‘s IP address or a server on the corporate LAN that is
being accessed through the SSL VPN tunnel.