Teledyne powerpod 400 Manual Do Utilizador
164-122012 Power
P
OD
400
Page 10 of 42
1.
CHANNEL NUMBER SELECT KEYS
Selects channel for editing. An asterisk (*) appears in the first column of the display to indicate that this is the channel to
be edited.
be edited.
2. OVERRIDE
INDICATORS
Indicates when a channel’s command signal is overridden high (OPEN) or low (CLOSED).
3. OVERRIDE
KEYS
Override the command signal on the ACTIVE CHANNEL. OPEN sets control override (pin 8) to +15V. CLOSED
sets command to –15V. AUTO allows the user to set the command signal for normal operation. A channel must be
sets command to –15V. AUTO allows the user to set the command signal for normal operation. A channel must be
active before these keys can become operational.
4. DISPLAY
AREA
Column 1:
Reserved for displaying ACTIVE CHANNEL (*), MASTER channel (M), SLAVE (S) or
TOTAL (T).
Column 2:
Reserved for polarity indicator.
Col’s 3 – 8:
Signal monitor. Displays current input signal while in METER mode, AVERAGE while set
to average readings or TOTAL while in TOTALIZER mode.
to average readings or TOTAL while in TOTALIZER mode.
Column 9:
Space
Col’s 10 – 14:
UNITS OF MEASURE display.
Column 15:
Space
Col’s 16 – 20:
GAS ID.
5.
KEYPAD
Use to enter SET POINTS or to modify the SETUP or CALIBRATION of control unit.
5.0 Front Panel
CLOSE
P
Pod
ower
HASTINGS
OPEN
OPEN
CLOSE
OPEN
CLOSE
OPEN
CLOSE
1
4
3
2
7
1
4
0
9
3
6
8
2
5
.
400