Teledyne powerpod 400 Manual Do Utilizador

 

Page 6 of 42

 

 

 
Read this manual in its entirety before operating the POWER

-400 Power Supply/Totalizer.  The 

-400 is designed to operate with most Teledyne Hastings Instruments (THI) flow controllers 

and meters.  Read all wiring and power hookup instructions and understand the requirements prior to 
using another manufacturer’s products with the POWER

-400.  Insure that any product being 

interfaced with the POWER

-400 is wired according to prevailing local safety and operational 

standards before operating. 

 
 
 
 

 

 

 

 
The WARNING label indicates important information that should be heeded for safe and proper 

performance of the device. 
 

The label, CAUTION, is used to indicate that damage to the power supply or equipment 
connected to it could occur if directions are not followed.  Warranty could be invalidated if the 
instructions in this manual are not followed. 
 
 

2.0  Safety 

When found on the device, this symbol indicates that the operator should refer to 

the manual for important instructions on the proper use of this device.  When found 
in the manual, this symbol indicates that the reader should understand the 

implications contained in the text before operating the device. 

This symbol indicates that a shock hazard may be present.  Read the instruction 

manual carefully and insure that the device is wired properly and that all settings 
have been checked prior to applying power to the device. 

The following symbols and terms may be found on THI products and/or in THI manuals and indicate 

important information.