Dimension One Spas 01510-1030E Rev A Manual Do Utilizador

Export Sonic Immersion System Dealer Installation Guide 

 

1.  Remove the panel where you just finished installing the 

speakers. 

2.  Locate two speaker wire sets (P/N 01564-21). The wires 

have clear insulator with a silver and copper wire and female 
connectors on one end.  

3.  Using a Cable Tyes and Cable Mounts (P/N 01200-006 and 

01200-005), attach the wires to the frame in the approximate 
location of the speakers directly below the edge of the spa, 
see Figure 45, until you come to the corner panel. 

 

 

1.  Speaker Wires Attached with Cable Tyes and Mounts 

4.  When you get to the corner panel use a thin, blunt object to 

force the wires up under the overhanging lip of the spa and 
the panel, Figure 46. 

 

42