Q-Logic 8100 Manual Do Utilizador
6–iSCSI Noninteractive Commands
-nc (Display Neighbor Cache)
SN0054667-00 C
6-17
-nc
(Display Neighbor Cache)
To display the neighbor cache (IPv6 only), issue the -nc command as follows:
-nc <hba_port_inst>
-netconf
(Configure IPv6 Settings)
To configure the network settings, issue the -netconf command as follows:
-netconf <hba_port_inst> [-IP <IP address>] [-IPNM <subnet mask>]
[-IPGW <gateway IP address>]
[-IPGW <gateway IP address>]
Where:
Setting the IP address, subnet mask, or gateway turns off DHCP address
resolution for the IP configuration, if it is on.
resolution for the IP configuration, if it is on.
TCP Options
TCP_Auto_Discovery
SLPADIS
on or off
TCP_DHCP
TCPDHCP
on or off
TCP_Nagle
TCPN
on or off
TCPMaxWindowSize
TCPMWS
1000h–FFFFh
TCP_Time_Stamp
TCPTMS
on or off
Miscellaneous Options
KeepAliveTO
KATO
0–65535
Large_Frames
LRGFRM
on or off
a
MaxBurstLen
MBL
0–65535
MaxOutstandingR2T
MOR2T
0–65535
a
Not for QLA4010
IP <IP address> = Set the IP address of the adapter
IPNM <subnet mask> = Set the subnet mask of the adapter
-IPGW <gateway address> = Set the gateway
-DISN4 = Disable IPv4 network setup
-IPv4DHCP = Set DHCP on
Table 6-3. Adapter Parameters (Continued)
Configuration Name
Configuration Alias
Value