Yamaha 5TE-F8197-10 Manual Do Utilizador
5 - 6
COOL
THERMOSTAT
CHECKING THE THERMOSTAT
1.Check:
1.Check:
●
Thermostat
1
Does not open at 63.5 ~ 66.5 °C (146.3 ~
151.7 °F)
151.7 °F)
→ Replace.
*****************************************************
Checking steps:
Checking steps:
●
Suspend the thermostat in a container filled
with water.
with water.
●
Slowly heat the water.
●
Place a thermometer in the water.
●
While stirring the water, observe the
thermostat and thermometer’s indicated
temperature.
thermostat and thermometer’s indicated
temperature.
*****************************************************
1 Thermostat
2 Thermometer
3 Water
4 Container
È Fully closed
É Fully open
É Fully open
NOTE:
If the accuracy of the thermostat is in doubt,
replace it. A faulty thermostat could cause
serious overheating or overcooling.
replace it. A faulty thermostat could cause
serious overheating or overcooling.
2.Check:
●
Thermostat cover
Cracks/damage
Cracks/damage
→ Replace.
INSTALLING THE THERMOSTAT
1.Install:
1.Install:
●
Thermostat
1
●
Thermostat cover
NOTE:
Install the thermostat with its breather hole a
toward the projection b.
toward the projection b.
2.Fill:
●
Cooling system
(with the specified amount of the
recommended coolant)
Refer to “CHANGING THE COOLANT” in
CHAPTER 3.
(with the specified amount of the
recommended coolant)
Refer to “CHANGING THE COOLANT” in
CHAPTER 3.
3.Check:
●
Cooling system
Leak
Leak
→ Repair or replace any faulty part.