Yamaha 5TE-F8197-10 Manual Do Utilizador
8 - 7
CHAS
FRONT BRAKE
CAUTION:
Disc brake components rarely require
disassembly. DO NOT:
disassembly. DO NOT:
●
disassemble components unless
absolutely necessary;
absolutely necessary;
●
use solvents on internal brake
components;
components;
●
use spent brake fluid for cleaning; (use
only clean brake fluid)
only clean brake fluid)
●
allow brake fluid to come in contact with
the eyes, as this may cause eye injury;
the eyes, as this may cause eye injury;
●
splash brake fluid onto painted surfaces or
plastic parts, as this may cause damage;
plastic parts, as this may cause damage;
●
disconnect any hydraulic connection, as
this would require the entire brake
system to be disassembled, drained,
cleaned, properly filled and bled after
reassembly.
this would require the entire brake
system to be disassembled, drained,
cleaned, properly filled and bled after
reassembly.
REPLACING THE FRONT BRAKE PADS
NOTE:
It is not necessary to disassemble the brake
caliper and brake hose to replace the brake
pads.
caliper and brake hose to replace the brake
pads.
1.Measure:
●
Brake pad wear limit
a
Out of specification
→ Replace the brake
pads as a set.
Brake pad wear limit:
1 mm (0.04 in)
2.Install:
●
Brake pads
●
Brake pad spring
NOTE:
Always install new brake pads, brake pad shim
and brake pad spring as a set.
and brake pad spring as a set.