Graco 8480 Manual Do Utilizador

plate) on the rear of the 
seat 

‹

. 

dry place until it is needed
again. Then reinstall by
reversing these instructions.
See the illustration on page 
46 to check the correct path 
for the harness.

1. Use of the tether is not required when using the

seat in this mode; however, it may keep the
seat more stable. See section 5.3, step 11, “To
secure the tether” (page 31) for instructions on
tether use.

2. Place booster seat firmly against the back 

of a forward-facing vehicle seat suitable for 
the booster seat as explained in section 4,
“Selecting a Suitable Location for the Car
Seat” (page 13) and equipped with a lap/
shoulder belt. DO NOT place booster seat in a
seating position that only provides a lap belt. 
If a front passenger seat is used, slide the 
vehicle seat rearward as far as possible from
the dashboard. 

3. Be sure that the vehicle seat back is locked in 

position.

‹