Patton electronic 3086FR Manual Do Utilizador
DSLAM Connections with remote CPE units
88
Model 3086FR ATM IAD User Guide
8 • 3086FR routed and bridged ATM connections
2. On the Menu, go to Configuration, then to WAN Connections. Delete the factory default WAN services
already defined.
Click on
Create a new service
in the main window, select
PPPoA_Bridged
and click on the
Configure
button.
In the Description field, enter the description you wish. In this example, it is called PPPoA Bridged.
– VPI = 0
– VCI = 300
– LLC header mode = off
– HDLC header mode = off
– No authentication
– Leave User name and Password blank.
Click on
Apply
.
3. Go to G.SHDSL in the Configuration Menu, then the submenu Configuration.
Change Terminal Type to Remote and Interface Type to atm. Click on the
Configure
button.
In the Action submenu under G.SHDSL, change Action to
Deactivate
, then click on
Action
.
Return to Action, select
Start
and click on
Action
.
Model 3086FR (Central)Configuration Steps (PPPoA Bridged)
From the command line interface (CLI) via the RS-232 control port,
fi
ip list interfaces