Patton electronic 3086FR Manual Do Utilizador

DSLAM Connections with remote CPE units

Model 3086FR ATM IAD User Guide 

3. Configuration Menu > Configuration > IP Routes > Click on Create new Ip V4 Route  > Create the gate-

way to the remote 3086FR by entering the WAN IP address of the remote 3086FR, in this example, enter 
192.168.164.3 in the Gateway field > OK

The other fields should be:

– Destination:0.0.0.0

– Gateway:192.168.164.3

– Mask:0.0.0.0

– Cost:1

– Interface:[blank]

4. Go to G.SHDSL in the Configuration Menu, then the submenu Status.  The Modem State should be 

“deactivated.” (If not, go to the Action and change it to deactivate.)

Then in the Action submenu under G.SHDSL, change Action to 

, then click on 

.  

 

From the command line interface (CLI) via the RS-232 control port,

fi   

ip list interfaces

fi   

pppoh clear transports