Sony KDL-26S2000 Manual Do Utilizador

Screw the support belt (supplied) to the TV stand with a wood screw 
(supplied).

Attach the support belt to the stand, and screw the belt with a securing 
screw (supplied) using a coin, etc.

Adjust the length by pulling the support belt towards you while holding 
the TV stand.

Refer to the Instruction Guide supplied with the wall-mount bracket on how 
to mount the TV to the wall.

Be sure to take measures to prevent the TV from toppling over and 
causing injury.

The supplied wood screw may not be used depending on the type of TV 

stand. In this case, or when the securing strength is not enough, 
prepare commercial screws to fit to the TV stand. Use commercial 
screws of 3 to 4 mm (1/8 to 3/16 inches) diameter. Consult your dealer 
about the types of screw.