Renesas R5S72622 Manual Do Utilizador
Section 26 USB 2.0 Host/Function Module
R01UH0134EJ0400 Rev. 4.00
Page 1369 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit
Name
Initial
Value R/W Description
Value R/W Description
14 REW
0
R/W* Buffer
Pointer
Rewind
Specifies whether or not to rewind the buffer pointer.
0: The buffer pointer is not rewound.
1: The buffer pointer is rewound.
When the selected pipe is in the receiving direction,
setting this bit to 1 while the FIFO buffer is being read
allows re-reading the FIFO buffer from the first data
(in double buffer mode, re-reading the currently-read
FIFO buffer plane from the first data is allowed).
setting this bit to 1 while the FIFO buffer is being read
allows re-reading the FIFO buffer from the first data
(in double buffer mode, re-reading the currently-read
FIFO buffer plane from the first data is allowed).
Do not set REW to 1 simultaneously with modifying
the CURPIPE bits. Before setting REW to 1, be sure
to check that FRDY is 1.
the CURPIPE bits. Before setting REW to 1, be sure
to check that FRDY is 1.
To re-write to the FIFO buffer again from the first data
for the pipe in the transmitting direction, use the
BCLR bit.
for the pipe in the transmitting direction, use the
BCLR bit.
13, 12
All
0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
should always be 0.