Renesas R5S72622 Manual Do Utilizador
Section 26 USB 2.0 Host/Function Module
Page 1372 of 2108
R01UH0134EJ0400 Rev. 4.00
Sep
24,
2014
SH7262 Group, SH7264 Group
Bit Bit
Name
Initial
Value R/W Description
Value R/W Description
3 to 0
CURPIPE[3:0] 0000
R/W
CFIFO Port Access Pipe Specification
Specifies the pipe number for reading or writing data
through the CFIFO port.
through the CFIFO port.
0000: DCP
0001: Pipe 1
0010: Pipe 2
0011: Pipe 3
0100: Pipe 4
0101: Pipe 5
0110: Pipe 6
0111: Pipe 7
1000: Pipe 8
1001: Pipe 9
Other than above: Setting prohibited
After writing to these bits, read these bits to check
that the written value agrees with the read value
before proceeding to the next process.
that the written value agrees with the read value
before proceeding to the next process.
Do not set the same pipe number to the CURPIPE
bits in CFIFOSEL, D0FIFOSEL, and D1FIFOSEL.
bits in CFIFOSEL, D0FIFOSEL, and D1FIFOSEL.
Even if an attempt is made to modify the setting of
these bits during access to the FIFO buffer, the
current access setting is retained until the access is
completed. Then, the modification becomes effective
thus enabling continuous access.
these bits during access to the FIFO buffer, the
current access setting is retained until the access is
completed. Then, the modification becomes effective
thus enabling continuous access.
Note: * Only 0 can be read and 1 can be written.