Intel Xeon Wolfdale E3210 P4X-UPE3210-316-6M1333 Ficha De Dados

Códigos do produto
P4X-UPE3210-316-6M1333
Página de 326
Datasheet
187
Host-Primary PCI Express* Bridge Registers (D1:F0)
6.51
VC0RCAP—VC0 Resource Capability
B/D/F/Type:
0/1/0/MMR
Address Offset: 110–113h
Default Value:
00000001h
Access:
RO 
Size:
32 bits
Bit
Access
Default 
Value
Description
31:16
RO
0000h
Reserved 
15
RO
0b
Reject Snoop Transactions (RSNPT): 
0 = Transactions with or without the No Snoop bit set within the Transaction 
Layer Packet header are allowed on this VC.
1 = When Set, any transaction for which the No Snoop attribute is applicable but 
is not Set within the TLP Header will be rejected as an Unsupported Request.
14:8
RO
0000h
Reserved 
7:0
RO
01h
Port Arbitration Capability: Indicates types of Port Arbitration supported by 
the VC resource. This field is valid for all Switch Ports, Root Ports that support 
peer-to-peer traffic, and RCRBs, but not for PCI Express Endpoint devices or 
Root Ports that do not support peer to peer traffic.
Each bit location within this field corresponds to a Port Arbitration Capability 
defined below. When more than one bit in this field is Set, it indicates that the 
VC resource can be configured to provide different arbitration services.
Software selects among these capabilities by writing to the Port Arbitration 
Select field (see below).
Defined bit positions are:
Bit[0] 
=  Default = 01b; Non-configurable hardware-fixed arbitration 
scheme, e.g., Round Robin (RR)
Bit[1] 
=  Weighted Round Robin (WRR) arbitration with 32 phases
Bit[2] 
=  WRR arbitration with 64 phases
Bit[3] 
=  WRR arbitration with 128 phases
Bit[4] 
=  Time-based WRR with 128 phases
Bit[5] 
=  WRR arbitration with 256 phases
Bits[6:7] = 
Reserved
MCH default indicates "Non-configurable hardware-fixed arbitration scheme".