Atlona AT-LINE-PRO2 Manual Do Utilizador
4.2. Rear Panel
1. HDMI OUT and CO-AX OUT:
Connect the HDMI OUT port to the HDMI input port of your display such as HDTV. Connect the CO-AX
OUT port to the Coaxial (S/PDIF) input port of your amplifier for separate digital audio output.
OUT port to the Coaxial (S/PDIF) input port of your amplifier for separate digital audio output.
2. AUX IN Input:
When the video signal input through the HDMI IN port is from a DVI source such as a PC, use the AUX IN
port to input the audio signal.
port to input the audio signal.
3. HDMI IN Input:
Connect the HDMI IN port to the HDMI output port of your source equipment such as DVD player or Set-
Top-Box. Or, use HDMI to DVI cable to connect to the DVI output of your PC.
Top-Box. Or, use HDMI to DVI cable to connect to the DVI output of your PC.
4. RS-232:
Used for remote control and firmware updates.
5. PC IN for Video and Audio Input:
Connect the PC IN D-Sub (15-pin) port to the D-Sub output port of your PC. And, connect the PC IN
3.5mm phone jack to the audio output port of your PC.
3.5mm phone jack to the audio output port of your PC.
6. Y Pb/Cb Pr/Cr Video and L/R Audio Input:
Connect the Y Pb/Cb Pr/Cr (Component) 3 RCA input ports to the Component output port of your video
source equipment such as DVD player or Set-Top-Box. And, connect the L/R audio input ports to the au-
dio output port of your audio source equipment.
source equipment such as DVD player or Set-Top-Box. And, connect the L/R audio input ports to the au-
dio output port of your audio source equipment.
7. CO-AX Input:
The CO-AX port provides the digital audio input support, and can be used to combine with each video
input signals from CV/SV/COMP/PC/HDMI ports. Once connected, please use the Audio Source Selection
in the OSD menu to select between Coaxial (S/PDIF) or other audio source (see section “4.3 OSD Opera-
tion” for reference.)
input signals from CV/SV/COMP/PC/HDMI ports. Once connected, please use the Audio Source Selection
in the OSD menu to select between Coaxial (S/PDIF) or other audio source (see section “4.3 OSD Opera-
tion” for reference.)
8. Composite Video / S-Video and L/R Audio Input:
Connect the Composite or S-Video input port to the Composite or S-Video output port of your video
source equipment such as DVD player or Set-Top-Box. And, connect the L/R audio input ports to the au-
dio output port of your audio source equipment.
source equipment such as DVD player or Set-Top-Box. And, connect the L/R audio input ports to the au-
dio output port of your audio source equipment.
9. Power:
Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet.
1
3
5
6
8
9
7
4
2
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4