Chariot Carriers CX 1 Manual Do Utilizador

All models are equipped with the Chariot two-in-one weather 
cover, which consists of a plastic window that can be rolled up 
with mesh beneath it.

TIP

The mesh provides limited UV protection.

The two-in-one weather cover is secured at the bottom by a 
double velcro fastener. First the velcro tag of the two-in-one 
weather cover is pressed onto the velcro surface on the carrier. 
Then the velcro on the carrier is pressed from the outside 
against the velcro tab of the two-in-one weather cover.

WARNING

Always make sure that the velcro fastener is properly fas-
tened.

First undo the outer tabs of the assembly at both velcro 
fasteners. Then lift the two-in-one weather cover upwards, 
pulling equally on both of its tabs.

TIP

On the Cougar and CX, make sure the upper corners rubber 
seal of the two-in-one weather cover is properly seated. If 
this is not the case, the seal will not effectively prevent water 
penetration.

A sunscreen is located under the upper rear of the two-in-one 
weather cover.

If it is not being used, it can be rolled up and secured with the 
loops located at the top corners. The two-in-one weather cover 
is then placed over it and fastened.

On the CX the front extended length tinted fl ap can be rolled up 
and secured with two loops.