Toshiba IPSe32X Manual Do Utilizador

32338AC

NETWORK SETUP

Network Setup allows you to adjust network settings such as Ports, and enable Remote Access.

Time Out Value –

When attempting to connect to the recorder, if the connection does not succeed during the timeout period (seconds),

the connection will be terminated (default: 60).
Emergency Port –

Connect with the Alarm Monitor software (default port: 2001).

Center Port –

Connect with the Surveillix remote software (Remote, SCS, the Surveillix App). This port must be specified in the remote

software to connect to the recorder (default port: 2000).
Setup Port –

Enable access to recorder setup when using SCS. This port is locked to the center port, plus 10. (default port: 2010).

Note

Center Port 1025 is not available.

Image Port –

Transfers the video to the Surveillix remote software (default port: 2002).

Search Port –

Transfers search information to the Surveillix remote software (default port: 2003).

Note

If connecting to the recorder through a firewall, the above ports must be open to incoming and outgoing traffic.

Health Check Port –

Enable SCS to receive information regarding the health of the recorder (default port: 2005).

Audio Port –

Enable two-way audio (default port: 3002).

Transport Setup –

Use this section to configure the quality and speed of the video sent to remote clients.

Keyboard Control –

Enable the recorder to work with a Keyboard Joystick Controller.

Clip Backup –

Set the server port for clip backup (default port: 9876).

View IP Address –

View the IP address of your recorder for use in remote access applications.

Enable two-way audio between recorder and Remote Client

Remote Client Ports

View live video via

Internet Explorer