Panasonic AG-MX70P Manual Do Utilizador
16
Parts and their functions
L
R
L
R
L
R
L
R
1
2
3
4
L
R
AUDIO IN
AUDIO OUT 1
1
Analog audio 1 input connectors
The audio signals supplied to these connectors are input
to the cross point selected on the initial setting page.
to the cross point selected on the initial setting page.
1
2 Analog audio 2 input connectors
The audio signals supplied to these connectors are input
to the cross point selected on the initial setting page.
to the cross point selected on the initial setting page.
3 Analog audio 3 input connectors
The audio signals supplied to these connectors are input
to the cross point selected on the initial setting page.
to the cross point selected on the initial setting page.
4
5
Analog audio 4 input connectors
The audio signals supplied to these connectors are input
to the cross point selected on the initial setting page.
to the cross point selected on the initial setting page.
Analog audio output connectors
2
3
4
5
EDITOR interface connector (9-pin)
This connector is used to connect the unit with an RS-
422A or RS-232C controller.
422A or RS-232C controller.
1
2 RS-422A/RS-232C selector switch
This is used to switch between the RS-422A and RS-
232C control protocols.
232C control protocols.
4 TALLY output connector
The rear panel tally is for the cross point 1, 2, 3, 4, 5, 6, 7
or 8 output.
The connector used by the cross point is turned ON.
or 8 output.
The connector used by the cross point is turned ON.
Example of tally connections
3 SIGNAL GND (ground) terminal
5 AC IN power socket
RS422
RS232C
SIGNAL
GND
GND
~AC IN
O
1
2
R
TALLY
EDITOR
AUDIO OUT 1
1
4
2
5
3
AG-MX70
GND
TALLY
output
output
Tally LED
(Max. current: 50 mA)
(Max. voltage: 3.5V)