Planet Technology FST-802S15/802S35/802S50 Manual Do Utilizador
- 10 -
3. MANAGE THE MEDIA CONVERTER
This product provides two different managed methods – configure through its DIP Switch or install into the central Web
Smart Media converter chassis for centralize management.
Smart Media converter chassis for centralize management.
This section describes how to managed the FST-80x through its DIP Switch and Web Smart Media converter chassis.
Before use the FST-80x smart function, please read this chapter carefully.
Before use the FST-80x smart function, please read this chapter carefully.
3.1 DIP Switch configuration
The FST-80x provide DIP switch to setting fiber (HDX/FDX), UTP (Auto-negotiation / Manual), speed (10/100Mbps), du-
plex mode (Half / Full duplex mode), LLR (Disable / Enable), LLCF (Disable / Enable). Please refer to the table below for
more detail decription.
plex mode (Half / Full duplex mode), LLR (Disable / Enable), LLCF (Disable / Enable). Please refer to the table below for
more detail decription.
DIP Switch
Mode
Description
On
Fiber operates at Half Duplex mode.
DIP Switch 1
Off
Fiber operates at Full Duplex mode (default).
On
TX operates at Forced Mode.
DIP Switch 2
Off
TX operates at Auto-Negotiation (default).
On
TX operates at 10Mbps duplex mode.
DIP Switch 3
Off
TX operates at 100Mbps duplex mode (default).
On
TX operates at Half Duplex mode.
DIP Switch 4
Off
TX operates at Full Duplex mode (default).
On LLR
Enable.
DIP Switch 5
Off
LLR Disable (default).
On LLCF
Enable.
DIP Switch 6
Off
LLCF Disable (default).
#
Notice:
After change the DIP Switch setting, please power off and power on the FST-80x to take affect.