KitchenAid W10189719A Manual Do Utilizador

1. Insert damper assembly through the cabinet cutout so that the 

long tab of the damper assembly slides into the slot on the left 
side of the damper vent opening, as shown. Then secure with 
mounting screw.

NOTE: The screw cannot be installed if the damper assembly is 
not positioned as shown.

2. Connect vent to damper assembly.

1. Refer to the Use and Care Guide for instructions on how to 

install filters into your model.

2. Plug microwave oven into grounded 3 prong outlet.
3. Reconnect power.
4. Check the operation of microwave oven by placing 1 cup 

(250 mL) of water on the turntable, and programming a cook 
time of 1 minute at 100% power. Test vent fan and exhaust by 
operating the vent fan.

5. If the microwave oven does not operate:

■

Check that a household fuse has not blown, or that a 
circuit breaker has not tripped. Replace the fuse or reset 
the circuit breaker. If the problem continues, call an 
electrician.

■

Check that the power supply cord is plugged into a 
grounded 3 prong outlet.

■

See the Use and Care Guide for troubleshooting 
information.

Installation is now complete.
Save Installation Instructions for future use.

A                             B                                  C

D

A              B