Cooper Lighting IMI-606 Manual Do Utilizador

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.

1.  Open the Door - 

Press both BUTTON LATCHES at the same time and open the door. 
See Figure 1.

2. Reflector Removal - 

Press the two REFLECTOR TABS  outward and 
swing the REFLECTOR down. 
See Figure 2a and Figure 2b.

NOTE: Disconnect REFLECTOR CONNECTOR from 

the HOUSING as shown in Figure 2c.

General: Upon receipt of fixture thoroughly inspect for any
freight damage, which should be brought to the attention of
the delivery carrier. Compare the catalog description listed
on the packing slip with the fixture label on the housing to
assure you have received the correct merchandise.

Safety: This fixture must be wired in accordance with 
the national electrical code and applicable local codes 
and ordinance. Proper grounding is required to insure 
personal safety. Carefully observe grounding procedure. 
All work should be done by an electrician.

TM