Honeywell MS-9600UDLSE Manual Do Utilizador

116

MS-9600LS Series Manual — P/N 52646:B2  2/12/2010

Programming

Walktest allows an individual to test the fire alarm system without the necessity to reset the control 
panel after each device activation.  Pressing 2 while viewing the Programming Screen #3 will cause 
the following Walktest options to be displayed:

To perform a silent walktest which will not sound the NACs, press 1 while viewing the Walktest 
Screen.  To perform an audible walktest, which will sound the NACs, press 2 while viewing the 
Walktest Screen.  When either option is chosen, the panel will enter Walktest Mode and the follow-
ing screen will be displayed:: 

From this screen, it is possible to view the walktest log, untested system points or a summary of the 
addressable devices tested during the current walktest.  The user can select between any of these 
screens without interrupting the current walktest session.  The walktest session will not end until 
the Unit In Walktest screen is exited by pressing the Escape key.

Pressing 1 for View Walktest Log while viewing the Unit In Walktest screen will cause a screen sim-
ilar to one of the following two screens to be displayed:

If there are no events in the current walktest session, the first screen will be displayed, indicating no 
events have been stored in the walktest log.  If any events have been stored, a screen similar to the 
second will be displayed indicating the latest event.  As walktest events occur, the display will 
change to indicate the latest event.  All stored events can be scrolled on the screen by pressing the 
up or down arrow keys.  To return to the first event, press the 1st Event key.

    PROGRAMMING

1=HISTORY

2=WALKTEST

3=OPTION MODULES

Programming Screen #3

     WALKTEST

1=SILENT

2=AUDIBLE

3=VIEW RESULT

   UNIT IN WALKTEST

1=VIEW WALKTEST LOG

2=VIEW POINTS

3=VIEW SUMMARY

 NO EVENTS IN

 WALKTEST LOG

ALARM: MONITOR

NORTH CLASSROOM

              Z001

10*15A 020510 1M006

OR