Enviro 1200 Fireplace Freestanding Manual Do Utilizador

Installation

When replacing bricks, use only pumas type fire bricks.
TOTAL BRICKS:
15 - Full size bricks  9” long x 4.5” wide x 1.25” thick

 

 

 

(22.9 cm long x 11.4 cm wide x 3.2 cm thick)

2 - Partial bricks       9” long x 3” wide x 1.25” thick

 

 

 

(22.9 cm long x 7.6 cm wide 3.2 cm thick)

1 - Half brick   

4.5 “ long x 4.5” wide x 1.25” thick

 

 

 

(11.43 cm long x 11.43 cm wide x 3.175 cm thick)

Removing Air Tube: If a secondary air tube needs to be removed, place a screwdriver (any style except 

flat head) into one of the air holes and tap it with a hammer/mallet to the left until the right end of the 

tube is freed.  To installation a secondary air tube reverse the above instructions.
IMPORTANT: All secondary air tubes must be in place for proper operation.

36

1. Place  the  four  (4)  full  size 

bricks  along  each  side  of 

the firebox and one (1) full 

size  brick  on either  side  of 

the back of the firebox.

2. To place the floor bricks, lay 

the  two  (2)  partial  bricks 

along the back of the floor. 

Then on the left, lay three 

(3)  full  size  bricks  and  on 

the  right,  lay  two  (2)    full 

size bricks in the center and 

the  half  brick  in  the  front 

(for  the  ash  dump).  The 

spaces  between  the  bricks 

will soon fill with ashes.