Midland Radio 40 Channel CB Radio with 4-Watt Output Power Manual Do Utilizador

Página de 16
Channel
Frequency 
(megahertz - MHz)
1
26.965
2
26.975
3
26.985
4
27.005
5
27.015
6
27.025
7
27.035
8
27.055
9
127.065
10
27.075
11
27.085
12
27.105
13
27.115
14
27.125
15
27.135
16
27.155
17
27.165
18
27.175
19
27.185
20
27.205
21
27.215
22
27.225
23
27.255
24
27.235
25
27.245
26
27.265
27
27.275
28
27.285
29
27.295
30
27.305
31
27.315
32
27.325
33
27.335
34
27.345
35
27.355
36
27.365
37
27.375
38
27.385
39
27.395
40
27.405
1See paragraph (b) of this section
(b) Channel 9 may be used only for emergency communications or for 
traveler assistance.
(c) You must, at all times and on all channels, give priority to 
emergency communication messages concerning the immediate 
safety of life or the immediate protection of property.
(d) You may use any channel for emergency communications or for 
traveler assistance.
(e) You must share each channel with other users.
(f) The FCC will not assign any channel for the private or exclusive 
use of any particular CB station or group of stations.
(g) The FCC will not assign any channel for the private or exclusive 
use of CB stations transmitting single side-band or AM.
§ 95.408 (CB Rule 8) How high may I put my antenna?
(a) Antenna means the radiating system (for transmitting, receiving 
or both) and the structure holding it up (tower, pole or mast). It also 
means everything else attached to the radiating system and the 
structure.
(b) If your antenna is mounted on a handheld portable unit, none of 
the following limitations apply.
(c) If your antenna is installed at a fixed location, it (whether 
receiving, transmitting or both) must comply with either one of the 
following:
(1) The highest point must not be more than 6.10 meters (20 feet) 
higher than the highest point of the building or tree on which it is 
mounted; or
(2) The highest point must not be more than 18.3 meters (60 feet) 
above the ground.
(d) If your CB station is located near an airport, and if you antenna 
structure is more than 6.1 meters (20 feet) high, you may have to 
obey additional restrictions. The highest point of your antenna must 
not exceed one meter above the airport elevation for every hundred 
meters of distance from the nearest point of the nearest airport 
runway. Differences in ground elevation between your antenna and 
the airport runway may complicate this formula. If your CB station is 
near an airport, you may contact the nearest FCC field office for a 
worksheet to help you figure the maximum allowable height of your 
antenna. Consult part 17 of the FCC’s Rules for more information.
WARNING:———————————————————
Installation and removal of CB station antennas near power lines 
is dangerous. For your safety, follow the installation directions 
included with your antenna.
————————————————————————
[48 FR 24894, June 3, 1983, as amended at 48 FR 41416, Sept. 
15, 1983]
§ 95.409 (CB Rule 9) What equipment may I use at my CB 
station?
(a) You must use an FCC type-accepted CB transmitter at your CB 
station. You can identify an FCC type-accepted transmitter by the 
type-acceptance label placed on it by the manufacturer. You may 
examine a list of type-accepted equipment at any FCC Field Office 
or at FCC Headquarters. Use of a transmitter which is not FCC 
type-accepted voids your authority to operate the station. 
(b) You must not make, or have made, any internal modification to 
a typeaccepted CB transmitter. (See CB Rule 25, §95.425). Any 
internal modification to a type-accepted CB transmitter cancels the 
type-acceptance, and use of such a transmitter voids your authority 
to operate the station.
§ 95.410 (CB Rule 10) How much power may I use?
(a) Your CB station transmitter power output must not exceed the 
following values under any conditions: AM (A3)—4 watts (carrier 
power) SSB—12 watts (peak envelope power)
(b) If you need more information about the power rule, see the 
technical rules in subpart E of part 95.
(c) Use of a transmitter which has carrier or peak envelope power in 
excess of that authorized voids your authority to operate the station.
§ 95.411 (CB Rule 11) May I use power amplifiers?
(a) You may not attach the following items (power amplifiers) to your 
typeaccepted CB transmitter in any way:
(1) External radio frequency (RF) power amplifiers (sometimes 
called linears or linear amplifiers); or
(2) Any other devices which, when used with a radio transmitter as 
a signal source, are capable of amplifying the signal.
(b) There are no exceptions to this rule and use of a power amplifier 
voids your authority to operate the station.
(c) The FCC will presume you have used a linear or other external 
RF power amplifier if—
(1) It is in your possession or on your premises; and
(2) There is other evidence that you have operated your CB station 
with more power than allowed by CB Rule 10, § 95.410.
(d) Paragraph (c) of this section does not apply if you hold a license 
in another radio service which allows you to operate an external RF 
power amplifier.
§ 95.412 (CB Rule 12) What communications may be 
transmitted?
(a) You may use your CB station to transmit two-way plain language 
communications. Two-way plain language communications are 
communications without codes or coded messages. Operating 
signals such as ‘‘ten codes’’ are not considered codes or 
coded messages. You may transmit two-way plain language 
communications only to other CB stations, to units of your own CB 
station or to authorized government stations on CB frequencies 
about—
(1) Your personal or business activities or those of members of your 
immediate family living in your household;
(2) Emergencies (see CB Rule 18, § 95.418)
(3) Traveler assistance (see CB Rule 18, § 95.418); or
(4) Civil defense activities in connection with official tests or drills 
conducted by, or actual emergencies announced by, the civil 
defense agency with authority over the area in which your station is 
located.
(b) You may use your CB station to transmit a tone signal only when