Midland Radio 40 Channel CB Radio with 4-Watt Output Power Manual Do Utilizador

1.  Easy removal mounting bracket system.
2.  Microphone bracket system.
3.  All main-unit and microphone mounting hardware needed for normal installation.
4.  Plug-in microphone with coil cord.
5.  FCC part 95, Subpart D.
6.  Owner’s Manual.

Your new Midland CB is designed to be installed either under the dash or vertically 
on a console of your vehicle. Safety and convenience are primary considerations in 
deciding exactly where to locate your radio.

Caution:  Be sure the unit is located so it does not interfere with the driver, 
supplemental restraint systems (air bags), or impair access to any controls.  
Connecting cables must be routed and secured in such a manner as to not interfere 
with the operation of the brake, accelerator or other controls. Interference from either 
the unit or connecting cables may contribute to loss of control of the vehicle.

1. Heeding the caution above, use the mounting bracket as a template for marking the  

location of screw holes under the dash.  Use an awl, nail or other sharp pointed  
object to mark the hole locations.

2. Drill a 1/8” hole for each screw hole in the mounting bracket. Attach the bracket to 

the dash with the Phillips head sheet metal screws provided.

Extreme care should be exercised when drilling into the dash to avoid 
damage to under-dash electronic ignition, cruise control, instrument and / 
or accessory wiring.

3. Position the main unit between the bracket arms in line with the retention knobs.  Set 

the angle for optimum operating, comfort and accessibility.

4. Tighten the retention knobs.