Yamaha NS-IW660 Manual Do Utilizador

2

Read these precautions carefully before installing your NS-IW660 speaker.

z

  Before you begin installation, read this owner’s manual completely and consult your local building codes. If you 

have any doubts or reservations, contact your dealer or a qualified audio/video installer. 

z

  YAMAHA recommends installing the speaker only in two-by-four wood frame or similar construction. The 

instructions provided in this owner’s manual are intended specifically for this type of wall construction. 

z

  When installing your NS-IW660 in-wall speaker, be aware of the product weight (See specification page) and 

the sturdiness of the material into which you are installing the speaker. 

z

  Be aware of any concealed studs, electrical wiring or plumbing in the wall or ceiling into which you are 

installing the speakers. If you are not sure of a safe way to install these speakers, consult a professional 
installer or a building contractor.

z

  Never touch the speaker units with your hands or expose them to excessive physical shock. If they are dented 

or bent, the sound will be distorted.

z

  Lower the power amplifier/receiver volume control before changing input sources. Never change input sources 

(for example, FM to CD) at high listening levels. Always turn the receiver/amplifier unit off when installing or 
removing any cables.

z

  Anytime you note distortion, reduce the volume control on your power amplifier/receiver to a lower setting. 

Never allow your power amplifier to be driven into  “clipping”.

z

  Secure placement or installation is the owner’s responsibility. YAMAHA shall not be liable for any accident 

caused by improper placement or installation of speakers.

Installation shall be in accordance with the applicable section of the National Electrical Code, ANSI/NFPA 70, 
and/or the National Fire Alarm Code, ANSI/NFPA 72, as applicable. The wiring method and compartment shall 
be such as not to interfere with the operation of the speaker.