First Alert 9120/9120B/9120AB/9120LB/9120B-48P/9120B-48B/9120B-GFD/91206CP/9120B6CP Folheto
Description:
DUAL IONIZATION
Dual Ionization sensing chamber.
Generally more effective at detecting
small particles produced by flaming
fires. Sources may include paper or
kitchen grease.
Generally more effective at detecting
small particles produced by flaming
fires. Sources may include paper or
kitchen grease.
LATCHING ALARM
INDICATOR
Remembers which unit initiated an alarm.
SINGLE BUTTON
TEST/SILENCE
Silences and tests alarm with a single
button.
button.
TWO LOCKING
FEATURES
Pins are provided to lock battery drawer
and/or alarm to base. Perfect for
apartment, dormitory or hotel
applications.
and/or alarm to base. Perfect for
apartment, dormitory or hotel
applications.
Available in the following versions:
9120
AC Alarm with silence
9120B
AC Alarm with silence and battery backup
9120AB
Same as 9120B but with alkaline battery
9120LB
Same as 9120B but with lithium battery
9120B-48P
48 pack of Boxed 9120B
9120B-48B
48 pack of Bulk 9120B
9120B-GFD
18 count Gravity Feed Display
91206CP
Contractor Bulk 6-pack of 9120 Alarm
9120B6CP
Contractor Bulk 6-pack of 9120B Alarm
Listed to
Standard
UL 217
CAT.
9120 Series
SMOKE
ALA RM
120V AC, 60Hz Wire-in
with 9V Battery Backup (9120B)
(Model 9120B only)
The BRK Brands, Inc. Model Numbers 9120 and 9120B are wire-in, 120V AC 60Hz
single and/or multiple station smoke alarms specifically designed for residential
and institutional applications including sleeping rooms of hospitals, hotels, motels,
dormitories and other multi-family dwellings as defined in standard NFPA 101.
Models 9120 and 9120B comply with UL217, CSFM, NFPA 72, HUD, FHA and other
agencies that model their codes after the above agencies. They meet building
codes where AC and AC/DC with Silence smoke alarms are required. The alarms
are interconnectable with up to 18 devices, of which 12 can be smoke alarms.
single and/or multiple station smoke alarms specifically designed for residential
and institutional applications including sleeping rooms of hospitals, hotels, motels,
dormitories and other multi-family dwellings as defined in standard NFPA 101.
Models 9120 and 9120B comply with UL217, CSFM, NFPA 72, HUD, FHA and other
agencies that model their codes after the above agencies. They meet building
codes where AC and AC/DC with Silence smoke alarms are required. The alarms
are interconnectable with up to 18 devices, of which 12 can be smoke alarms.
The BRK
®
9120 Series alarms feature a dual ionization smoke sensing chamber
screened for insect protection, an 85dB horn, 9V battery back-up (all versions
except model 9120) and a “silence” feature. The “Smart Technology” system is
designed to reduce nuisance alarms. “Latching Alarm Indication” remembers
which unit initiated an alarm. When interconnected in a series, the unit that
triggered the alarm rapidly flashes its red LED indicator. After the alarm condition
subsides, the initiating unit will store in memory or “latch” the information and
begin to flash the green LED indicator 2 seconds on, 2 seconds off. The “Perfect
Mount” system features a gasketless base and a mounting bracket that keeps the
alarm secure over a wide rotation range to allow for true alignment. This will allow
fine-tuning on the positioning to compensate for out of aligned wall studs and to
keep the wording level when wall mounting. A Single button test/silence button
eliminates confusion. Depending on what mode the alarm is in, pushing the button
will test, silence, re-test the alarm when in silence and clear the latching feature.
Battery installation and removal can occur while the unit is mounted to the ceiling
or wall via the side load battery compartment. Other Contractor Preferred features
include a dust cover to keep alarm clean during construction, keyhole slots in the
mounting bracket eliminate the need to remove the electrical box screws for
installation. Two locking features are provided to prevent battery theft and/or
theft of the unit. Connection to AC
power is made with a
“Quick-Connect” wiring
harness. Installation is
quick, easy and cost
effective.
except model 9120) and a “silence” feature. The “Smart Technology” system is
designed to reduce nuisance alarms. “Latching Alarm Indication” remembers
which unit initiated an alarm. When interconnected in a series, the unit that
triggered the alarm rapidly flashes its red LED indicator. After the alarm condition
subsides, the initiating unit will store in memory or “latch” the information and
begin to flash the green LED indicator 2 seconds on, 2 seconds off. The “Perfect
Mount” system features a gasketless base and a mounting bracket that keeps the
alarm secure over a wide rotation range to allow for true alignment. This will allow
fine-tuning on the positioning to compensate for out of aligned wall studs and to
keep the wording level when wall mounting. A Single button test/silence button
eliminates confusion. Depending on what mode the alarm is in, pushing the button
will test, silence, re-test the alarm when in silence and clear the latching feature.
Battery installation and removal can occur while the unit is mounted to the ceiling
or wall via the side load battery compartment. Other Contractor Preferred features
include a dust cover to keep alarm clean during construction, keyhole slots in the
mounting bracket eliminate the need to remove the electrical box screws for
installation. Two locking features are provided to prevent battery theft and/or
theft of the unit. Connection to AC
power is made with a
“Quick-Connect” wiring
harness. Installation is
quick, easy and cost
effective.
d to prevent battery theft and/