Philips DVP5982C1/37 Manual Do Utilizador
English
16
Optional connections
(continued)
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Connecting a USB Flash
Drive or USB mass storage
device
Drive or USB mass storage
device
Using USB port
You can only view the content of
following supported USB devices through
this DVD player.
following supported USB devices through
this DVD player.
A
Connect the supported USB device
directly to the USB port on the front
panel (as shown on the above
illustration).
panel (as shown on the above
illustration).
B
Press USB button on the remote
control in order to view the fi les stored
in the supported USB device.
in the supported USB device.
C
Stop the playback before removing the
supported USB device from the USB
port.
port.
USB extension cable
(Optional accessory - not supplied)
Tips:
– The USB port supports playback of JPEG/
MP3/WMA fi les.
– Not all Portable audio/video players and
Digital cameras are supported.
– While connected to a card reader, only
one card can be read at the same time.
– If non-supported USB device is plugged in,
‘Device Not Supported’ will be displayed.
– If the USB device does not fi t into the USB
port, a USB extension cable is required.
– The format FAT16, FAT32 can be
supported by USB and not NTFS.
– The USB port supports playback of JPEG/
MP3/WMA fi les.
– Not all Portable audio/video players and
Digital cameras are supported.
– While connected to a card reader, only
one card can be read at the same time.
– If non-supported USB device is plugged in,
‘Device Not Supported’ will be displayed.
– If the USB device does not fi t into the USB
port, a USB extension cable is required.
– The format FAT16, FAT32 can be
supported by USB and not NTFS.
1_dvp5982MKII_37_eng 2.indd 16
1_dvp5982MKII_37_eng 2.indd 16
2007-08-20 5:02:52 PM
2007-08-20 5:02:52 PM