Philips DVP3310/05 Manual Do Utilizador

Página de 32
4
     
  This product complies with the radio 
interference requirements of the European 
Community.
  This product complies with the requirements 
of the following directives and guidelines: 
2006/95/EC, 2004/108/EC.
This product is in compliance with the EEE 
directive.
     About Progressive Scan
    
  Consumers should note that not all high 
de nition television sets are fully compatible 
with this product and may cause artefacts to 
be displayed on the picture. In case of 525 
or 625 progressive scan picture problems, 
it is recommended that the user switch the 
connection to the ‘standard de nition’ output. 
If there are questions regarding our TV set 
compatibility with this model 525p and 625p 
DVD player, please contact our customer 
service centre.
     Recycling
   
  Your product is designed and manufactured 
with high quality materials and components, 
which can be recycled and reused.
  When you see the crossed-out wheeled bin 
symbol attached to a product, it means the 
product is covered by the European Directive 
2002/96/EC:
         1 Important
    Safety and important notice
 Warning
 Risk of overheating! Never install the DVD player in 
 
a con ned space such as a bookcase. Always leave a 
space of at least four inches around the DVD player 
for ventilation. Ensure curtains or other objects 
never cover the ventilation slots on the DVD player.
  Never place the DVD player, remote control or 
 
batteries near naked  ames or other heat sources, 
including direct sunlight.
  Only use this DVD player indoors. Keep this DVD 
 
player away from water, moisture and liquid- lled 
objects.
  Never place this DVD player on other electrical 
 
equipment.
  Keep away from this DVD player during lightning 
 
storms.
  Where the mains plug or an appliance coupler is 
 
used as the disconnect device, the disconnect device 
shall remain readily operable.
  Visible and invisible laser radiation when open. Avoid 
 
exposure to beam.
    Mains fuse (UK only) 
  This DVD player is  tted with an approved 
moulded plug. Should it become necessary to 
replace the mains fuse, this must be replaced 
with a fuse of the same value as indicated on 
the plug (example 10A).
    1
  Remove fuse cover and fuse. 
    2
  The replacement fuse must comply with 
BS 1362 and have the ASTA approval 
mark. If the fuse is lost, contact your 
dealer in order to verify the correct type. 
    3
  Re t the fuse cover.
    In order to maintain conformity to the EMC 
directive, the mains plug on this product must 
not be detached from the mains cord.
EN