Philips DCB3070/10 Manual Do Utilizador

Important notes for users in the U.K.

Mains fuse

This information applies only to products with a UK mains plug.

This product is fitted with an approved non-molded plug. If you replace the fuse, use one with:

• the ratings shown on the plug,

• a BS 1362 approval, and

• the ASTA approval mark.

Contact your dealer if you are not sure about what type of fuse to use.

Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the

power cord.

How to connect a plug

The wires in the power cord are colored as follows: blue = neutral (N), brown = live (L).

If the colors do not correspond with the colors on your plug, identify the terminals in your plug as

follows:

Connect the blue wire to the terminal marked N or colored black.

Connect the brown wire to the terminal marked L or colored red.

Do not connect either wire to the earth terminal in the plug, marked E (or e) or colored green (or

green and yellow).

Before you replace the plug cover, make sure that the cord grip is clamped over the sheath of the cable

and not just over the two wires in the cable.

DCB3070_10_UM_Book 1_V2.0.indb 2

4/23/2012 12:30:40 PM