Philips AJ210/05 Manual Do Utilizador
Clock
Digital tuner Alarm
Setting the clock and date
(see
(see
2)
The clock uses 24-hour time format.
1
Press and hold TIME SET for 2 seconds.
➜ The digits for year flash.
➜ The digits for year flash.
2
Hold down or press TUNING +/- repeatedly
to adjust the time digits.
to adjust the time digits.
•
When it comes to adjust month and day, you
may press DATE to change the display order
between month and day.
may press DATE to change the display order
between month and day.
3
Press TIME SET to confirm the setting.
➜ The digits for month flashes.
➜ The digits for month flashes.
4
Repeat steps 2-3 to complete all the other
settings for month, day, hour and minute.
settings for month, day, hour and minute.
Standby power consumption
(clock mode).........................................................1.5W
Digital tuner
Tuning to radio station
1
Press RADIO ON/OFF to switch on the
radio (FM only).
➜ The radio station frequency and the wave-
radio (FM only).
➜ The radio station frequency and the wave-
band will be displayed. (See
3).
2
Press and hold TUNING +/- until the
frequency in the display starts running.
➜ The radio automatically tunes to a station
frequency in the display starts running.
➜ The radio automatically tunes to a station
of sufficient reception.
3
Repeat step 2 if necessary until you find the
desired station.
desired station.
•
To tune to a weak station, press TUNING
+/- briefly and repeatedly until you have
found optimal reception.
+/- briefly and repeatedly until you have
found optimal reception.
To improve reception:
FM: Extend and adjust the pigtail for optimum
FM: Extend and adjust the pigtail for optimum
reception.
Programming radio stations
You can store up to a total of 10 radio sta-
tions in the memory (10 FM), manually or
automatically (Auto store).
tions in the memory (10 FM), manually or
automatically (Auto store).
Manual programming
1
Tune to your desired station (see Tuning to
radio stations).
radio stations).
2
Press and hold PRESET +/- to activate pro-
gramming.
➜ Display: PRSET flashes.
gramming.
➜ Display: PRSET flashes.
3
Press PRESET +/- once or more to allocate
a number from 1 to 10.
a number from 1 to 10.
4
Repeat steps 1-3 to store other stations.
Helpful hints:
–
You can erase a preset station by storing
another frequency in its place.
another frequency in its place.
Autostore
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
1
In radio mode, press AUTO SCAN until
the frequency in the display starts running.
➜ Available stations are programmed (FM).
After all stations are stored, the first autostore
preset station will then automatically play.
the frequency in the display starts running.
➜ Available stations are programmed (FM).
After all stations are stored, the first autostore
preset station will then automatically play.
To listen to a preset or autostore
station
station
Press the PRESET +/- buttons once or
more until the desired preset station is dis-
played.
more until the desired preset station is dis-
played.
Using the alarm
AJ210 allows you to simultaneously set two
different alarms (ALARM 1 and ALARM 2 )
which can go off in the radio or buzzer
mode.The clock time needs to be set
correctly before using alarm.
different alarms (ALARM 1 and ALARM 2 )
which can go off in the radio or buzzer
mode.The clock time needs to be set
correctly before using alarm.
Setting alarm time
1
Press briefly ALM 1 or ALM 2 to display
AL1 or AL2 icon.
AL1 or AL2 icon.
2
Press and hold ALM 1/ ALM 2 for two
seconds.
➜ The hour digits flash.
seconds.
➜ The hour digits flash.
3
Hold down or press TUNING +/- repeatedly
to adjust the hours.
to adjust the hours.