Philips DVDR3570H/05 Manual Do Utilizador

English

Step 2: Optional Connections

(continued)

Connecting to a camcorder

You can use the front sockets to copy
camcorder recordings. These sockets are
located behind the fl ap on the right hand
side which provides convenient
connections.

Option 1: Using the DV IN socket

Use this connection if you have a Digital
Video or Digital 8 camcorder. The DV
socket conforms to the i.LINK standard.
It provides the best picture quality.

Connect an i.LINK 4-pin cable (not

supplied) from the DV IN socket on the
recorder to the appropriate DV OUT
socket on the camcorder.

Press CAM on the remote control to

select ‘CAM2’.

Helpful Hint:
– It is not possible to record from this
recorder to your camcorder via the DV IN
socket on your recorder.

Option 2: Using the VIDEO In
socket

Use the VIDEO connection if your
camcorder has only a single video output
(Composite Video, CVBS). It provides
good picture quality.

Connect the VIDEO socket at the front

panel of the recorder to the
corresponding S-VHS or Video output
socket on the camcorder.

Connect the audio cable (red/white - not

supplied) from the AUDIO L/R sockets
at the front panel of the recorder to the
audio output socket on the camcorder.

Press CAM on the remote control

followed by P +/- repeatedly to select
‘CAM1’.

Helpful Hint:
– If you connect your camcorder to the scart
socket at the rear of this recorder, select
{ EXT1 } or { EXT2 } as the input source.

Option 1

Option 2