Philips DVP3258/94 Manual Do Utilizador

33

(underlined options are the factory default settings)

 

This setting is only required if you have connected the audio 
output of this unit to a stereo device, multi channel audio system 
or TV using the analog output jack. 
{ LT/RT } 

–  The connected device has a built-in 

Dolby Pro Logic decoder. It can deliver 
the surround sound through the two 
speakers.

{ Stereo } 

–  The connected device can only output 

stereo audio through two speakers.

{ V SURR } 

–  For virtual surround sound effects.

{ Multi Channel }  –  The connected device can output 5.1 

channel sound.

This setting is only required if you have connected the audio 
output of this unit to an amplifier/receiver using the digital 
output jack.  

{ Digital Output }  –  { SPDIF Off } 

 

Disable digital audio output. Select this 
if you are using the analog audio jacks 
to connect this unit to a TV or Stereo 
system.

 

 

{ All } 

 

 

The connected device supports multi-
channel audio formats. The digital audio 
format will be output as on disc.

 

 

{ PCM Only }

 

 

The connected device does not support 
multi-channel formats. All audio signals 
are downmixed to PCM format  
(-channel).

{ LPCM Output }  –  { 48 K }  

Select this to play disc recorded at 
sampling rate of 48 kHz.

 

 

{ 96 K } 

 

 

Enable 96 kHz output on digital audio if 
the amplifier/receiver is compatible 
with high sampling rate audio (88. / 96 
kHz). However, if the sound output is 
distorted or there is no sound, change 
the setting to ‘48 K’.

Note: LPCM Output can only be selected when { PCM Only } is 
activated. The higher the sampling rate, the better the sound 
quality.

dvp3256_3258_3268_94_eng1.indd   33

2008-04-17   2:17:42 PM