Philips Soundcard Seismic Edge Bulk Manual Do Utilizador
37
Speaker Test Tab
The speaker test tab is a utility to help verify proper speaker connections to your sound card. The acronyms
are defined as follows:
LF – Left Front Speaker
CTR – Center Speaker
RF – Right Front Speaker
RS – Right Surround Speaker
LFE – Low Frequency Effects / Subwoofer
LS – Left Surround Speaker
Select the Output Mode you wish to test.
There are two modes to test your speaker settings: Manual and Auto
There are two modes to test your speaker settings: Manual and Auto
Manual Mode:
Once you have selected the appropriate Output Mode, click on any of the desired speakers to verify proper
connection. You can check the Loop Sounds box that will result in continuous sound in that speaker. Click the
Stop button to stop the test.
Auto Mode:
Clicking on Auto Mode. Sounds will emanate in sequence starting with LF and cycle through each speaker in
the Output Mode you selected. The Stop Button and Loop Sounds options do not apply to Auto Mode.
Once you have selected the appropriate Output Mode, click on any of the desired speakers to verify proper
connection. You can check the Loop Sounds box that will result in continuous sound in that speaker. Click the
Stop button to stop the test.
Auto Mode:
Clicking on Auto Mode. Sounds will emanate in sequence starting with LF and cycle through each speaker in
the Output Mode you selected. The Stop Button and Loop Sounds options do not apply to Auto Mode.