Nokia N85 NEGRO/GRIS 002J1H8 Manual Do Utilizador

Códigos do produto
002J1H8
Página de 180
an account for a compatible online album)
To return to the viewfinder to record a new video
clip, press the capture key.
Camera settings
There are two kinds of settings for the camera: setup
settings and main settings. The setup settings return
to the default settings after you close the camera, but
the main settings remain the same until you change
them again. To adjust the setup settings, use the
options in the active toolbar. 
 To change the main settings, in the
image or video mode, select 
Options
 > 
Settings
.
Still image camera settings
To change the main settings, in the image mode, select
Options
 > 
Settings
 and from the following:
Image quality
  — Set the resolution (main camera
only). The better the image quality, the more
memory the image consumes.
Add to album
  — Save the image to an album in
Photos.
Record location
  — To add GPS location coordinates
to each image file, select 
On
. Receiving a GPS signal
may take time or the signal may not be available.
Show captured image
  — Select whether to view
the captured image after it is taken or to continue
image capturing immediately.
Default image name
  — Define the default name
for the captured images.
Extended digital zoom
  — The setting is only
available in the main camera.
On (continuous)
allows the zoom increments to be smooth and
continuous between digital and extended digital
zoom, 
On (paused)
 allows the zoom increments to
pause at the digital and extended digital step point,
and 
Off
 allows a limited amount of zoom while
retaining the image resolution. Use the extended
zoom only when getting closer to the subject is
more important than the final image quality. The
overall quality of a digitally zoomed image is always
lower than that of an unzoomed image.
Capture tone
  — Set the tone that sounds when you
capture an image.
Memory in use
  — Select where to store your
images.
Restore camera settings
  — Restore the camera
settings to default values.
Colour and lighting settings
In the active toolbar, select from the following:
Flash mode
 ( ) (image only) — Select the desired
flash mode.
Colour tone
 ( )  — Select a colour effect.
82
Ca
mera