Philips AVENT Digital baby thermometer set SCH540/01 SCH540/01 Manual Do Utilizador

Do not use abrasive cleaning agents, anti-bacterial cleaning agents or chemical 

solvents. Excessive concentration of cleaning agents may eventually cause plastic 

components to crack. Do not use cracked parts.
Clean the regular soother, the soother thermometer and the flexible-tip 

thermometer after each use to ensure optimal hygiene.

Be careful not to damage the parts when you clean them.

Before first use, wash and rinse the soother thoroughly.

Clean the soother before each use.
Before cleaning, always remove the measurement unit from the teat and shield.

  1 

 Turn the measurement unit 90° anticlockwise with respect to the shield.

  2 

 Pull the measurement unit straight out of the teat and shield.

  3 

 Clean the thermometer measurement unit with a soft damp cloth. 

Do not immerse the measurement unit in water.
Do not sterilise or boil the measurement unit.
Do not clean the measurement unit in the dishwasher, in the microwave or in a 

microwave steriliser.

  4 

 Sterilise or boil the soother and protection cap (not the measurement 

unit!).

The soother and protection cap are suitable for all forms of sterilisation.

Sterilise using a Philips AVENT Steam Steriliser or boil in water for 5 minutes.

If you use a sterilising solution, follow the instructions on the package. Do not leave 

the soother in the sterilising solution for longer than recommended, as this may 

weaken the teat.

Wash your hands thoroughly and ensure surfaces are clean before contact 

with sterilised components. 

  5 

 After sterilisation, let the soother cool down for 5 minutes and squeeze out 

any trapped water from the teat. This is to ensure hygiene.
to reassemble the soother thermometer:

  1 

 Align the blocks of the measurement unit with the matching slots in the 

back of the shield. 

12