Ariens 911099 Manual Do Utilizador

GB - 12

To change front wheel cutting height, insert 
height adjuster pin into the holes that match 
the desired cutting height and fasten with key 
ring (Figure 7).
To change rear wheel cutting height, move 
cutting height levers one notch at a time to 
set the desired cutting height.

Push the primer bulb in to add fuel for easier 
engine start.

Move choke lever to the choke position to 
start a cold engine.

The throttle controls the 
engine speed and chokes 
engine for starting.

1.Start - Push lever all the way 

forward.

2.Fast.
3.Slow - Pull lever all the way 

rearward.

The throttle controls the 
engine speed and chokes 
engine for starting.
1.Start - Push lever all the way 

forward.

2.Fast.
3.Slow - Pull lever all the way 

rearward.

A removable key operates the 
ignition switch. The key will 
spring back to the “RUN” 
position.

RUN Position (1): All controls 
are operable.
START Position (2): Starter 
turns over the engine.

Speed control rod changes the mower’s 
forward travel speeds.

High –Push rod all the way 
forward.

Low –Pull rod all the way 
rearward.

Figure 7

1. Cutting Height Lever
2. Height Adjuster Pin
3. Key Ring

1

2

3

Rear

Front

High

Low

OM1270

1

2

3

OL2074

1

2

3

OL2074

1

2

 

OM1000

OM0480