Dakota Alert Dakota Alert Manual Do Utilizador
6.
Troubleshooting the DCHT-2500
If the transmitter is not detecting, try one of these:
• Change the battery in the transmitter.
• Make sure the transmitter and receiver are coded alike.
• Move the transmitter closer to the receiver.
• Keep the transmitter away from large metal objects that may interfere with the radio signal.
• Adjust the screw on the air switch in the transmitter (Figure 2) (1) by turning it clockwise.
This will increase the sensitivity.
• If the contacts are touching, the system will not work.
• Change the battery in the transmitter.
• Make sure the transmitter and receiver are coded alike.
• Move the transmitter closer to the receiver.
• Keep the transmitter away from large metal objects that may interfere with the radio signal.
• Adjust the screw on the air switch in the transmitter (Figure 2) (1) by turning it clockwise.
This will increase the sensitivity.
• If the contacts are touching, the system will not work.
If the transmitter is giving false signals, try one of these:
• Adjust the screw on the air switch in the transmitter (Figure 2) (1) by turning it counter-
clockwise. This will decrease sensitivity.
• Set the transmitter and receiver to a different code setting. Refer to instructions on pages
3 and 5.
• Adjust the screw on the air switch in the transmitter (Figure 2) (1) by turning it counter-
clockwise. This will decrease sensitivity.
• Set the transmitter and receiver to a different code setting. Refer to instructions on pages
3 and 5.