Rinnai 26i Manual Do Utilizador
4
UNPACKING RINNAI WATER HEATER
•
After unpacking the appliance check for damage, if the heater is damaged contact
your supplier immediately. Do not install a damaged appliance before checking
with your supplier.
your supplier immediately. Do not install a damaged appliance before checking
with your supplier.
•
A heater accessories pack is inside the carton. One remote control is supplied
with the Infinity 26i. The HD50i does not come with controllers because it is a
commercial unit. It is compatible with them if they are required.
with the Infinity 26i. The HD50i does not come with controllers because it is a
commercial unit. It is compatible with them if they are required.
•
Check that the appliance supplied is the correct gas type for the installation. Refer
to the data plate located on the left-hand side of the appliance.
to the data plate located on the left-hand side of the appliance.
•
Remove the heater and the accessories from the carton, and check that all the
parts are included . The remote control cable is provided with spade connectors.
parts are included . The remote control cable is provided with spade connectors.
Quantity
Description
Remote Control Parts
1
Temperature controller MC-91-1A
1
Cable clamp
1
Cable Clamp
5
Spade connectors
1
Control cable 20 metres
Unit Mounting Fasteners
1
Clamp screw
5
Screw
5
Screw