Sennheiser EM 300-G3 Manual Do Utilizador
Using the operating menu
28
“Easy Setup”
Reset List
Releases all locked frequency presets
Current List
Selects an unused frequency preset
Scan New List
Scans for unused receiving frequencies (frequency preset scan)
Exit
Exits “
Easy Setup
” and returns to the main menu
–
Extended menu “Advanced Menu”
Tune
Sets the receiving frequencies for the frequency banks “
U1
” to “
U6
”
Sets the frequency bank, the channel and the transmission
frequency (frequency banks “
frequency (frequency banks “
U1
” to “
U6
”)
Sync Settings
Calls up the “
Sync Settings
” submenu:
Adjusts the parameters to be transferred to the transmitters and
activates/deactivates the transfer (see below)
activates/deactivates the transfer (see below)
Pilot Tone
Activates/deactivates the pilot tone evaluation
Warnings
Calls up “
Warnings
”: Activates/deactivates warnings
(color change and warning messages)
LCD Contrast
Adjusts the contrast of the display panel
Reset
Resets the settings made in the operating menu
IP-Address
Adjusts the IP address of the receiver
Software Revision
Displays the current software revision
Exit
Exits the extended menu “
Advanced Menu
” and returns
to the main menu
–
“Sync Settings”
SK Settings
Adjusts the parameters to be transferred to the SK transmitters and
activates/deactivates the transfer
activates/deactivates the transfer
SKM Settings
Adjusts the parameters to be transferred to the SKM radio
microphone and activates/deactivates the transfer
microphone and activates/deactivates the transfer
Exit
Exits the “
Sync Settings
” submenu and returns to the extended
menu “
Advanced Menu
”
Display
Function of the menu item
Page