Ariens 911110 - P 21LM Manual Do Utilizador

GB - 8

1. Remove mower and handlebar from 

carton.

2. Install the handlebars on the pivot pins 

attached to the handlebar uprights.

NOTE: Make sure the cables (connected to 
the handlebar) are on the left side of the unit.

3. Remove the handlebar mounting 

hardware from the handlebar uprights.

4. Rotate the handlebar up or down to the 

desired height and align the mounting 
holes with the holes in the handlebar 
upright.

5. Secure the handlebars in position with 

hardware removed in step 3.

CAUTION: AVOID INJURY. Read 
and understand the entire Safety 
section before proceeding.

Figure 3

1. Mower Unit
2. Mulch Cover
3. Side Discharge Chute
4. Mulch Plug
5. Literature Pack
6. Grass Bag

OM1706

Figure 4