NEC XP29 Xtra Manual Do Utilizador

The V-position/V-height/V-linearity Controls allow you to adjust the vertical

position, vertical size and vertical linearity of the image.

: Pressing + or - moves the image vertically up or down.

: Pressing + or - increases or decreases the vertical size of the

image (taller or shorter).

: Pressing + increases the spacing between the lines near the

top and decreases the lines near the bottom at the same time;

pressing - increases the spacing between the lines near the

bottom and decreases the lines near the top at the same time.

: Pressing + or - increases or decreases the spacing between

the lines near the top of your screen and near the bottom of

your screen at the same time.

The H-position/H-width/Pin-cushion Controls allow you to adjust the horizontal

position, horizontal size and pin-cushion of the image.

NOTE: The V-LINEARITY controls allow you to adjust the spacing of the

areas on the screen. The object of this control is to ensure that a one-inch

circle is a true one-inch circle where ever it is drawn on the screen.

• draw equally spaced horizontal lines using a drawing application that has a

ruler.

•use the V-LINEARITY 1 and 2 controls to adjust the spacing between

the lines near the top and the bottom of your screen.

The Keystone/Tilt/Rotation/Scan Select Controls/Moire Canceller allow you to

adjust the raster rotation or angle of the sides of your display, to select either

Under Scan (for RGB display) or Over Scan (for VIDEO display) and to reduce

moire.

: Pressing + or - moves the image horizontally right or left.

: Pressing + or - decreases or increases the horizontal size

of the image (wider or narrower).

: Pressing + or - decreases or increases the curvature of

the sides either inward or outward.

: Pressing + or - decreases or increases the curvature of

the sides to right or to left.

: Pressing + or - decreases or increases the curvature of

the top corners inward outward.

: Pressing + or - decreases or increases the curvature of

the bottom corners inward or outward.

: Pressing + or - increases or decreases the bottom of the

screen to be the same as the top.

: Pressing + or - increases or decreases the tilt of your

display.

: Pressing + or - rotates the entire display clockwise or

counter clockwise.

: Pressing + or - selects the over scan mode or the under

scan mode.

: Pressing + reduces moire and pressing - returns to the

normal condition. Keep pressing + until moiré is reduced to

the minimum level.

NOTE: Increasing + level too much can cause characters to

waver or to be blurred.