Jacuzzi J-280 Manual Do Utilizador

Economy filtration/heating modes (F4-F6) are typically selected by 

customers in warm climates where heat up times are minimized due 

to higher ambient temperatures. In either of these modes, the water 

temperature is regulated by the set temperature, low-speed pump or 

optional circulation pump, and heater only while a programmed filtration/

heating cycle is running. 

note: These modes can be used to conserve energy while on vacation 

or out of town for several weeks since heater operation is minimized. 

During such times, you can also minimize the spa set temperature to 

maximize energy savings!

These modes are designed for use during spa service or to prevent 

unauthorized use.

Press and hold both control panel WARMER ( ) and COOLER ( ) 

buttons at the same time, then release. Then press either WARMER  

( ) or COOLER ( ) button to select either filtration/heating mode or 

lock mode as outlined below.

section and refer to page 30 for filter cycle programming details.

(Heater automatically turns on during any heat call while in any Standard 

mode).

F1  4 hours of filtration/heating per day (one 2-hour cycle 

every 12 hours).

F2  6 hours of filtration/heating per day (one 2-hour cycle 

every 8 hours).

F3  8 hours of filtration/heating per day (one 2-hour cycle 

every 6 hours)

(Heater can only turn on during an active filter cycle while in any 

economy mode).

F4  4 hours of filtration/heating per day (one 2-hour cycle 

every 12 hours).

F5  6 hours of filtration/heating per day (one 2-hour cycle 

every 8 hours).

F6  8 hours of filtration/heating per day (one 2-hour cycle 

every 6 hours)

29